Following a small discussion I had about advantages and disadvantages of using different position sizing techniques in the ATC 2011 championship of the expert advisors I decided to talk a bit more about various position sizing rules that can used in Forex trading. It’s a very important topic and this blog’s readers agree with this thesis. In my opinion, there are 5 main types of position sizing techniques:

- Fixed position size
- Martingale position sizing
- Fixed fractional position sizing
ATR-based position sizingRisk-based position sizing

Below I try to explain more about each of these systems of rules.

### Fixed position size

Probably the most widely used position size — a trader just uses a fixed lot size (for example, 1 standard lot) on all the positions. The technique is very simple to implement — both manually and in expert advisor. It doesn’t require any calculations. The problem is that it’s very limited and can be quite dangerous (if the fixed size is too high).

The income of the trader doesn’t rise with the growth of the account balance — so the trader isn’t earning profit that would be earned by employing some other position sizing models. When a trader sets fixed position size to some large amount compared to the account balance, there’s a danger that the account will get wiped out in case of a continuous losing streak.

For my ATC 2011 EA I’ve chosen this type of position sizing because it offers a very fast buildup of balance in the beginning and becomes less aggressive in the end. So far I’ve been lucky with it: after one big loss, 2 positions are showing nice profit. Nevertheless, I don’t recommend this position sizing system for your real account trading.

**Example:** Every position’s volume is set to 3 standard lots.

### Martingale position sizing

If you think that the fixed position sizing is dangerous, then Martingale position sizing is definitely not for you. The main rule of this technique is to increase your position size as you take losses. It’s derived from Martingale gambling system, which involves doubling your bet anytime you lose and was very popular back in XIX century; it is still popular among some gamblers and Forex traders. This system offers a

In Forex, Martingale position sizing is somewhat popular partially because it offers a comfort of potential revenge on the market. A trader doubling a position size after a loss is hoping to get back what was lost and also gain some profit at the same time. In reality, a streak of 5–6 losses in a row usually leaves the trading account empty.

**Example:** Using one lot as a position size, you’ve lost $1,000 on a trade. You increase the next position’s size to two standards lots to double your potential profit (to cover your previous loss). If that one is lost too, you double the position size again to 4 standard lots, and so on.

### Fixed fractional position sizing

This system is often called reverse Martingale, because here a trader increases position size after a winning trade and decreases it after a losing trade. The idea is to minimize the risk of ruin and to increase exponentially the income in case of a continuous profitability of the employed trading strategy.

Although, it’s probably the most effective and safe position sizing systems for Forex, unfortunately, it also has its disadvantages. The biggest of them is that it works poorly with trading strategies that often involve losses after huge wins — such position sizing would then increase the loss, decreasing the overall strategy’s performance. I’ve dropped this method specifically because of that disadvantage, as my ATC 2011 EA often shows significant losses after winning a trade. Second disadvantage is a rather slow buildup of the account balance compared to fixed position sizing if moderate fraction ratio is used.

**Example:** Your account balance is $7,500. You decide to set your position size to 0.01% of your account size.

As you see, it is a very flexible position sizing system because you can vary the ratio and thus the risk according your preference.

ATR-based position sizing

Actually, it is just an additional rule for the fixed fractional position sizing technique (but can be used with any of them). It involves position size normalization according to the current value of Average True Range (ATR) indicator. ATR shows the volatility of the market. As ATR increases, a smaller position size would be advised because volatile market has a higher chance of pushing the trade out of its planned way. As ATR decreases, a bigger position can be opened as there is presumably less probability of a price spike to hit the

This position sizing

**Example:** Your account balance is $10,000 and you decide to set your position size to 0.02% of the account size. You are trading EUR/USD and consider

This method to adjust position size is extremely adaptive but due to the amount of required calculations is better used with the automated Forex expert advisors rather than manually.

Risk-based position sizing

This one is also an addition to the other position sizing rules and is more popular with the fractional position sizing too. While, usually, a Forex trader bases the position size solely on the size of the account, here, one would also apply the size of the

Example: Your account balance is $12,000 and your

To calculate position size for

### Conclusion

Some traders also use no position sizing rules in Forex at all. That’s not a very professional trait. Position sizing can help you to improve the strong points of the trading strategy and decrease the chance of ruining the live trading account. If you know traders that still size their positions chaotically, direct them to this article, please :-).

If you have some questions or comments regarding the listed position sizing rules in Forex, please feel free to reply using the form below.

I see it as a great ways, however, greed and cupidity stands in the way of perfect profits or cause big loss.

Thank you and I will try them, what do you mean by ” Units” in the Forex position size calculator? I did not get it..!!

▼Reply

admin Reply:

October 10th, 2011 at 10:43 am

Units are the units of currency. E.g. 1 dollar, 1 euro, etc. The standard Forex lot is made of 100,000 units. For example, when you buy 1 standard lot of EUR/USD, you are buying 100,000 euro.

▼Reply

In atr based postion sizing you mentioned “normal atr” and “current atr”.what are the calculations or indicators for determining these values?

▼Reply

Andriy Moraru Reply:

September 24th, 2014 at 9:37 am

Normal is what you consider normal for your strategy, there is no particular formula. You could try looking back on the chart watching historical ATR to find the “normal” value.

Current ATR is what is the value returned by ATR indicator right now.

▼Reply

thanks for the very practical technique. I am having a variable stop-loss expert advisor, based on trend and chart pattern. Can we have a “chance of stop-loss by ATR” add to the “risk-based” one, like: 0.45 lot * 2*SL/(SL+ATR). And how about this non-linear equation compare to just SL/ATR, “normal/current”. any up or down thoughts?

▼Reply

Andriy Moraru Reply:

April 27th, 2017 at 10:27 am

Essentially, your adjustment would decrease the position size when the ATR is greater than SL and increase it when your SL is more loose. This should work well in theory. In practice, the results would depend on how exactly your strategy runs and what ATR period compared to average age of your positions you use.

▼Reply

Nice Post very informative Thanks

▼Reply