Advertisements
$ £ ¥
¥ £ $

Installing MetaTrader 4 on Linux

Installing MetaTrader 4 on a Windows system is relatively easy. It is not surprising considering that the desktop application was designed specifically for Windows. But that makes installing the application on a Linux system relatively complicated. This guide explains different ways you can install MetaTrader 4 on Linux.

The guide uses Ubuntu 22.04 LTS as an example of a Linux system. It also assumes you know how to install MetaTrader 4 on Windows.


Installing and launching MetaTrader4 using Wine

As MetaTrader 4 is a native Windows application, the most obvious solution is to launch it using Wine. Wine is a compatibility layer that is used to launch Windows applications on Linux.

How to install Wine using the application center

In theory, the easiest way to install Wine is using Ubuntu Software (or a similar application center if you are using a different Linux distribution). To do so, launch Ubuntu Software and then enter wine in the search field.

Searching Wine in application center

Click on the Wine application and then click Install.

Installing Wine through application center

Theoretically, this should be enough to launch a MetaTrader 4 installer. Unfortunately, there is a chance that this method will not work (as has happened in our case). If this has happened to you, you will have to use the alternative method of installing Wine.

How to install Wine using Terminal

The alternative way to install Wine is to use the Terminal application. Using the text command line can be daunting for a newcomer but there is nothing too complex. Just enter the provided commands. You can even copy and paste them, though remember that you need to use the CTRL+Shift+v key combination when you want to paste into the terminal instead of the regular combination of CTRL+v. Remember to wait for a command to complete its execution before entering the next one. Some commands require you to enter the administrator password. You should know it and enter it when asked.

First, download and add the repository key by using the following couple of commands:

wget -nc https://dl.winehq.org/wine-builds/winehq.key

sudo mv winehq.key /usr/share/keyrings/winehq-archive.key

Next, add the repository with the following two commands:

wget -nc https://dl.winehq.org/wine-builds/ubuntu/dists/jammy/winehq-jammy.sources

sudo mv winehq-jammy.sources /etc/apt/sources.list.d/

Update packages using this command:

sudo apt update

Afterward, you need to install one of the provided packages. The Stable should be the safest option. In theory, you should be able to install it using the following command:

sudo apt install --install-recommends winehq-stable

Unfortunately, in our case, it could not be found. If that is also the case for you, try installing the Development branch. Here is the command:

sudo apt install --install-recommends winehq-devel

When the terminal warns you about the additional space being used and asks if you want to continue, press y.

Linux terminal warns about additional space used

If the terminal warns you about missing dependencies, you will need to install them and then repeat the last two steps (updating and installing packages).

If you are using a 64-bit system, you may also need to enable 32-bit architecture with the following command:

sudo dpkg --add-architecture i386

Instructions for installing Wine on other distributions of Linux as well as other versions of Ubuntu can be found on the WineHQ site.

How to install and launch MetarTrader4 using Wine

You will need to download the MetaTrader 4 installer for Windows. As MetaQuotes no longer provides the MetaTrader 4 installer, you will need to download it from one of the brokers that still provide it.

Go to the folder where you have downloaded the installer and right-click on it. Choose the Open With Other Application option. Choose Wine Windows Program Loader from the list of applications and click Select.

Selecting application loader in Linux

This opens the regular MetaTrader 4 installation application. Use it to install MetaTrader 4 the same way you would do on Windows.

Installing MetaTrader 4 on Linux

After the installation has finished, click Finish.

MetaTrader 4 installation finished

After that, the regular MetaTrader desktop app opens, and you can use it in a usual manner.

MetaTrader 4 for Linux

Next time you will want to launch the app, you can do it through the Show Applications dashboard.

The installation program also creates two icons on the desktop: for the MetaEditor and the MetaTrader 4 terminal itself.

Application icons disabled

To use them for launching the appropriate app, you have to right-click on each one of them and choose Allow Launching from the menu.

Application icons enabled

Installing and launching MetaTrader 4 using PlayOnLinux

For those who do not want to use text commands of the Linux terminal and prefer using GUI, there is an alternative option — PlayOnLinux. It is a front-end application for Wine.

How to install PlayOnLinux

Go to Ubuntu Software and enter playonlinux in the search field.

Searching PlayOnLinux in application center

Click Install.

Installing Wine through application center

How to install and launch MetaTrader 4 using PlayOnLinux

After installing and launching PlayOnLinux, click on Install a program in the Actions menu.

PlayOnLinux window

Click on Install a non-listed program.

PlayOnLinux program installation window

PlayOnLinux will show several messages. Read them if you wish and then click Next on each of them.

Afterward, PlayOnLinux Installation Wizard will launch. Click Next to continue the installation.

PlayOnLinux Installation Wizard

If the Wizard asks you to install additional packages, do so by clicking Install.

PlayOnLinux package installation

When prompted, choose Install a program in a new virtual drive and then click Next.

Installation of a program on a new virtual drive

Enter the name for your virtual drive and click Next.

Naming a new virtual drive

In the next window, do not select anything and just click Next.

Additional settings during installation of application

Choose 32bits windows installation and click Next.

Installation of 32-bits application

Click Browse.

Browse button

Go to the folder to which you have downloaded the installation file for MetaTrader 4 and double-click it. Then click Next.

Browsing for a file in PlayOnLinux

The regular MetaTrader 4 installer will open. Go through the usual steps to install the MetaTrader 4 desktop application. Click Finish after installation completes.

Afterward, MetaTrader 4 will launch but PlayOnLinux may display an error message. If that happens, try to close the MetaTrader 4 app and click Next on the message.

Error message during installation on PlayOnLinux

PlayOnLinux then offers to make shortcuts for applications you have installed. At the very least, you should make a shortcut for the MetaTrader 4 terminal. To do so, choose terminal.exe in the list and click Next.

Making shortcut in PlayOnLinux

Enter the name for the shortcut and click Next again.

Naming shortcut in PlayOnLinux

You can create shortcuts for other applications (MetaEditor for example) in the same way. Choose I don't want to make another shortcut and click Next when you are finished with creating shortcuts.

Finishing making shortcuts

If you have created a shortcut for the MetaTrader 4 terminal, you should see it in the PlayOnLinux window. You can just double-click on it to launch the application. You can also launch the app by selecting the shortcut and clicking Run in the tools panel at the top or in the Actions menu on the left. You can also click Create a shortcut in the Actions menu to create a shortcut on the Linux desktop, though PlayOnLinux usually does that automatically. If the shortcut on the desktop does not work, right-click on it and choose Allow Launching from the menu.

Shorcut in PlayOnLinux

If you forgot to make a shortcut for the MetaTrader 4 terminal app or want to make a shortcut for another app, click on the Configure button in the tools panel at the top. There, choose the virtual drive with your MetaTrader4 app and click Make a new shortcut from this virtual drive in the General tab. Proceed to make a shortcut the same way as it was discussed previously.

Configure menu in PlayOnLinux

Conclusion

Installing MetaTrader 4 on Ubuntu Linux takes just a few simple steps. Even though the installation process is a bit more difficult than it is on Windows, it is still manageable for any Forex trader, even a non-tech-savvy one. It is also worth noting that the process is fairly the same for other Linux flavors, however Ubuntu is likely the most popular Linux distro in the trader community.

If you want to share your opinion, ideas, or objections, or simply to ask questions regarding installation of MetaTrader 4 on Linux, feel free to join our Forex forum.

If you want to get news of the most recent updates to our guides or anything else related to Forex trading, you can subscribe to our monthly newsletter.